RSVP² for reverse path testing is designed specifically with the CATV installer in mind.
The Trilithic Guardian RSVPē™ Reverse Path Tester ensures return quality where it is most critical – the subscriber installation. Most return path problems begin in the subscriber’s home. Errors in installation, defective cabling, or incorrectly installed or loose hardware can all disrupt return path communications or allow ingress to enter the cable system. The Trilithic RSVPē Reverse Path Tester targets key return parameters that verify the installation is error-free and ready for the demands of VOD, VoIP and HSD return services. Return Path Tests: Quick, Sure and Easy
Pressing the "TEST" button opens communications with a Guardian 9581 SST™ Reverse Path Analyzer in the hub or headend. Automatic measurements quickly measure the required upstream transmit level and compute the Carrier/(Noise + Ingress) ratio for the path between the subscriber and the 9581 SST. The Trilithic RSVPē Reverse Path Tester compares the results to user-settable limits and in seconds displays a simple, unambiguous "PASS" or "FAIL."
Only the RSVPē / 9581 SST combination provides the ingress measurement range needed to ensure reliable HSD, VOD and VoIP services under all conditions. Of all available return path measurement systems, only the RSVPē Reverse Path Tester checks C/(N+I) with the range needed to ensure trouble-free service. Built-in Test Generator for Identifying Drops
The Trilithic RSVPē includes a tone modulated signal source for identifying cables in MDUs and other installations. Output is settable in both frequency and level. Fast Return Path Performance Testing
The RSVPē Tester performs measurements and analysis in seconds. The installer simply presses the START button and the RSVPē does the rest. Consistent Measurements
To deliver an unambiguous result, the RSVPē Tester also evaluates upstream level and C/(N+I) measurements against settable limits. Unmatched Measurement Range
Only the RSVPē Reverse Path Tester measures C/(N+I) with enough range to ensure that every installation will provide trouble-free service under all conditions.
All repairs carry a 90-day warranty against defects in replacement parts and repair workmanship.
All Trilithic XFTP products are warranted against defects in materials or workmanship for a minimum of one year after shipment to the original purchaser.
Trilithic's obligation under this warranty is limited to the repair or replacement of the product after being returned to our factory, and Trilithic determining the product be indeed defective.
This is Trilithic's sole warranty and is given in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for a particular purpose and sets forth the buyers sole remedy.
| STE-1200 | XPro Lite |
| TDR-2040 | XProTec Mini Sound Level Meter |
| TFS-1020 | XProTec Stud Finder and Laser Level |
| TPNA-1000 | XProTec 20-Way Cable Mapper |
| TR-3 | XProTec 8-Way Cable Mapper |
| Wild-Cat | XProTec Cable Tester & Universal Adapter Kit |
| XFTP SAT-2150 | XProTec Dual Frequency Oscillator |
| XFTP SAT Lite | XProTec Ultrasonic Distance Meter |
| CT-2/CT-3 |
| Model Two, Model Two Lite, Model Three & M3 Plus |
| RSVP² |
| Seeker Lite² |
Trilithic, Inc. ("Trilithic") warrants to the buyer that the product will be free from defects in materials and workmanship, under normal use, operating conditions and service for a period of one (1) or two (2) years from date of delivery based on the type of product as listed above. Trilithic reserves the right, before having any obligation under this limited warranty, to inspect the damaged product, and all costs of shipping the product to Trilithic for inspection shall be borne solely by the buyer. Trilithic's obligation under this limited warranty shall be limited, at Trilithic's sole option, to replacing or repairing the product, or to replacing or repairing any defective part. F.O.B. Indianapolis, Indiana. If neither of the two options is reasonably available, then Trilithic, in its sole discretion, may provide a prorated refund to the buyer of the purchase price of the product, as evidenced by the proof of purchase, less any applicable service fees in accordance with the following schedule:
Product with two (2) year warranty: months 0-3 = 100%; months 4-12 = 50%; and months 13-24 = 25%.
Product with one (1) year warranty: months 0-1 = 100%; months 2-6 = 50%; and months 7-12 = 25%.
Batteries and fans are not included or covered by the limited warranty. Any product or part that is repaired or replaced under this limited warranty shall be covered only for the remainder of the original warranty period which applied to the original product or part, or for ninety (90) days, whichever is longer. All products or parts that are exchanged for replacement shall become the property of Trilithic.
In order to recover under this limited warranty, buyer must make a written claim to Trilithic within sixty (60) days of the occurrence and must present acceptable proof of original ownership of the product (such as an original receipt, purchase order or similar documentation). In order for this limited warranty to be effective, the product must have been handled and used as set forth in the documentation accompanying the product and/or its packaging. This limited warranty shall not apply to any damage due to accident, misuse, abuse, neglect, fire or other casualty. Further, this limited warranty shall not apply to any product which has been altered or where the damage was caused by a part not supplied by Trilithic. Trilithic retains the final decision whether a product is within warranty conditions.
THE REMEDY SET FORTH HERIN SHALL BE THE ONLY REMEDY AVAILABLE TO THE BUYER AND TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT SHALL TRILITHIC BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE OR CONSQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, LOST REVENUES, LOST PROFITS, LOSS OF USE OF SOFTWARE, LOSS OR RECOVERY OF DATA, DOWNTIME, REPLACEMENT EQUIPMENT AND ANY THIRD PART CLAIMS ARISING OUT OF ANY THEORY OF RECOVERY INCLUDING WARRANY, CONTRACT, STATUTORY OR TORT IN CONNECTION WITH THE PRODUCT, EVEN IF TRILITHIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING THE FOREGOING, IN THE EVENT THAT THIS LIMITED WARRANTY FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT SHALL TRILITHIC'S ENTIRE LIABILITY TO BUYER EXCEED THE PURCHASE PRICE OF THE DEFECTIVE PRODUCT.
EXCEPT FOR THE LIMITED WARRANTY PROVIDED HEREIN, TO THE FULLEST EXTENT PERMITTED BY LAW, TRILITHIC DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), WITH RESPECT TO THE PRODUCT OR ITS SUITABILITY FOR ANY USE INTENDED FOR IT BY THE BUYER. TO THE EXTENT ANY IMPLIED WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, ANY SUCH WARRANTIES ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
This limited warranty is non-transferable. This limited warranty does not affect any other legal rights buyer may have by operation of law. No agent, reseller, distributor or business partner of Trilithic is authorized to modify the terms of this limited warranty on behalf of Trilithic.

Lab-quality adaptor for precision measurements. Female F-connector to Male push on F-connector. Loss ~ 0.1 dB at 1 GHz.

Precision RF coaxial test cable for connecting test equipment.

Data cable for the RSVP² . This data cable is used to connect to a PC using the ConfigR software.

This is the 50 to 53.75 & 70 to 75.75 MHz Telemetry Installers Reverse Path Tester for Domestic use. The RSPV² comes ready to use with a padded cloth carrying pouch, rechargeable NiCAD battery, AC to DC power adaptor/charger, and printed operation manual.

This is the 80 to 92 MHz Telemetry Installers Reverse Path Tester for International use. The RSPV² comes ready to use with a padded cloth carrying pouch, rechargeable NiCAD battery, AC to DC power adaptor/charger, and printed operation manual.

NiCAD battery for the RSVP² Reverse Path Tester.

Padded cloth carrying pouch with belt loop for the RSVP².

AC to DC power adaptor & battery charger for the RSVP² Reverse Path Tester.

RSVP² configuration software. Includes RSVP² Data Cable (I/O-6).